| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| M&T Jig Plans http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=15164 |
Page 1 of 1 |
| Author: | j.Brown [ Fri Dec 28, 2007 5:36 pm ] |
| Post subject: | |
I had a set of plans I purchased last year for constructing a mortise and tennon jig, but it disappeared in my move over the summer. Of course, now I need it to build the new jig, but they are gonzo and I apparently need to buy a new set. Any idea where I can source those plans? Thanks. -j. |
|
| Author: | Rod True [ Fri Dec 28, 2007 5:40 pm ] |
| Post subject: | |
Are you talking about the woolson neck jig plans J? |
|
| Author: | j.Brown [ Fri Dec 28, 2007 5:50 pm ] |
| Post subject: | |
Hmmm, maybe those were Paul's plans. I had them in a folder and the entire set is missing along with 1/2 of another set, but those came from Luthier's cool tools and I contacted them directly to get that one replaced. Moving sucks. |
|
| Author: | charliewood [ Sat Dec 29, 2007 8:53 am ] |
| Post subject: | |
j.Brown I have a set of the Woolson plans - Rod was kind enough to give his set to me when he was done using them!!! I also plan to pass them on when Im done with them,,,, so your welcome to them if you can wait until Im done constructing mine - just let me know - and thanks again Rod!!! Cheers Charlie |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|